Guns Info

1911 Gunsmithing Services

TRIGGER WORK:

TR01 – Trigger job with Ultimate commander ring hammer, sear, disconnector and hammer strut, 4 to 6 lbs with full power springs (trigger not included) 220.00
TR02 – Trigger job with Ultimate commander hammer (skeletonized hammer), sear, disconnector and hammer strut, 4 to 6 lbs with full power springs (trigger not included) 220.00
TR03 – Trigger job with EGW Lightened Hammer, sear, disconnector and hammer strut, 4 to 6 lbs with full power springs (trigger not included) 220.00
TR04 – Trigger job using your existing hammer, disconnector & strut (Colt & some other hammers are usable, MIM hammers are not). Includes new tool steel sear (Series 80 pistols also require TR10 to adjust safety levers) 130.00
TR10 – Series 80 pistols – adjust safety levers for proper function. 15.00
TR11 – Bob spur hammer to eliminate hammer bite 45.00 TR20 – Solid aluminum match trigger installed – smooth, short length with permanent overtravel stop 55.00
TR21 – Solid aluminum match trigger installed – smooth, long length with permanent overtravel stop 55.00
TR22 – 3-hole aluminum match trigger installed – serrated, long length with adjustable overtravel set screw. 55.00
TR23 – Custom solid aluminum trigger with smooth, slightly curved trigger shoe – short, medium & long lengths 72.00
Note: adding a commander hammer to a standard Government Model grip safety requires GR01 for hammer clearance

BARRELS, BUSHINGS & ACCURACY WORK:

AC01 – Match grade bushing installed – EGW thick flange bushing with carry bevel (blue or stainless). 70.00
AC02 – Match grade bushing installed – Standard GI thickness bushing (blue or stainless)
70.00 AC03 – Long nose recoil spring plug to match a thick flange bushing (smooth) 15.00
AC04 – Standard recoil spring plug to match standard GI bushing (checkered) 15.00
AC10 – Install Kart carbon steel match barrel & thick carry bevel bushing (5″ Govt Model, unramped .45 ACP). Includes barrel, bushing, link & pin. Installation includes reaming chamber, shaping & polishing the frame’s feed ramp. 360.00
Note: Barrel bushings are fit “finger tight” so they can be removed from the slide without a bushing wrench. Tighter fits are available upon request.
AC20 – Mill frame for ramped barrel 115.00
AC21- Re-crown muzzle, standard “GI” style 25.00
AC22 – Reverse muzzle crown – deep crown, barrel flush with bushing & polished 50.00
AC30 – Tighten slide-to-frame fit – laser weld frame rails & re-fit slide 250.00
AC31 – Fit oversized frame & slide 125.00

RELIABILITY & FEEDING:

RELIABILITY INSPECTION & TUNE: Inspect and tune the pistol for 100% reliable feeding including the following: Inspect barrel for proper chamber dimensions and throat; ream and correct if necessary and polish. Check extractor hook geometry & tension, adjust if necessary. Inspect & polish feed ramp. Inspect & polish breech face, deburr firing pin hole. Chamfer and/or polish all necessary surfaces in the cartridge feeding path to ensure 100% reliable feeding. Inspect the barrel timing, lug engagement, barrel crown, plunger tube, extractor, ejector, slide stop, all safeties, link clearance in frame, “bow tie” relief on the vertical impact surface and all springs. 95.00

Based upon the inspection, your pistol may require additional work such as installing a new ejector, machining the feed ramp to the proper geometry, machining the bow tie relief cut, increasing the link clearance, re-crown barrel, lowering and/or flaring the ejection port and replacing springs. Some Springfield Armory pistol will require drilling and installing a pin to secure the ejector. Springfield Armory GIs, Colt Series 70s and other pistols with a high ejection port will require SL01 to lower & flare the ejection port.

RE01 – Fit oversized firing pin stop with choice of standard or small radius on bottom edge 35.00
RE02 – Bar stock extractor installed and tuned 70.00
RE03 – Install bar stock plunger tube with frame holes properly chamfered & secured with loctite 40.00
RE04 – Machine frame’s feed ramp to proper dimensions & polish (non-ramped barrels) 50.00
RE05 – Machine vertical impact surface in frame with “bow tie” relief cut 35.00
RE06 – Extended ejector installed (5” Government Models without live cartridge relief at front of ejection port) 60.00
RE07 – Extended ejector installed plus relieve front of ejection port to allow ejection of live cartridge (for Commanders & shorter slides) 100.00
RE08 – Drill frame and install ejector pin (Springfield Armory pistols) 30.00
RE09 – Install steel feed ramp insert in aluminum frame 135.00
RE10 – Machine Bob Marvel disconnector ramp in slide 40.00

SIGHTS:

SI01 – Stake-on front sight installed – labor only 30.00
SI02 – Machine slide & install pre-made dovetail front sight, pinned to slide – labor only 50.00
SI03 – Machine slide & install Novak-type dovetail front sight blank, cut to correct height, serrated & pinned to slide – serrated black 85.00
SI04 – Machine slide & install SDM dovetail front sight blank, cut to correct height, serrated & pinned to slide with dovetail blended to slide – serrated black 130.00
SI10 – 14K gold bead added to front sight 60.00
SI11 – White plastic dot added to front sight 40.00
SI12 – Tritium installed in front sight with white ring around the tritium 50.00
SI14 – Tritium installed in front sight without white ring 45.00
SI20 – 10-8 NM rear sight installed, fits in standard Colt/GI rear dovetail 70.00
SI21 – Harrison retro rear sight, fits in standard Colt/GI rear dovetail 75.00
SI30 – Novak low mount rear sight installed (black, .125 or .140 square notch) 120.00
SI31 – Heinie Slant Pro rear sight installed (low mount cut – plain black serrated) 124.00
SI32 – Harrison HD-04 low mount rear sight installed, plain black serrated 140.00
SI33 – Harrison HD-04 T1 low mount rear sight installed with 1 tritium dot (no white ring) 175.00
SI34 – Harrison HD-04 T2 low mount rear sight installed with 2 tritium dots (no white rings) 200.00
SI35 – Novak low mount rear sight installed, 2 tritium dots with white rings. 175.00
SI36 – Heinie Slant Pro Straight 8 tritium rear sight (low-mount cut, no white ring) 165.00
SI37 – Harrison fixed rear sight installed in Bo-Mar or LPA sight cut POR
SI38 – Bo-Mar style (Kensight) adj. rear sight installed in standard low-mount cut. (price varies depending on sight blade options) Prices start at: 190.00
SI39 – Bo-Mar style (Kensight) adj. rear sight installed in “melted” low-mount cut. (price varies depending on sight blade options) Prices start at: 220.00
SI40 – Bo-Mar style (Kensight) adj. rear sight installed in forward “protected” position. This is a “melted” low-mount cut moved forward from the rear of the slide. (price varies depending on sight blade options) Prices start at 250.00
SI60 – Widen rear sight notch 25.00
SI61 – Narrow front sight blade 25.00
SI70 – Test fire and zero sights with 230 gr. FMJ factory ammo 55.00

SLIDE MODIFICATIONS:

SL01 – Lower & flare ejection port 60.00
SL02 – Flare ejection port – for slides with ejection port already lowered 20.00
SL03 – Relieve front of ejection port to allow ejection of live cartridge (for Commanders & shorter slides) 40.00
SL10 – Serrate rear of slide 55.00
SL11 – Serrate rear of spare extractor 25.00
SL20 – Flatten & serrate top of slide 40 LPI, serrations end in square pattern at front sight 120.00
SL21 – Flatten & serrate top of slide 40 LPI, serrations end in pointed pattern at front sight 120.00
SL30 – Ball cuts on front of slide 100.00
SL31 – Front cocking serrations added to match rear serrations 100.00
SL32 – French borders on slide 90.00
SL40 – Hi-Power cuts on front of slide (should be done with ball cuts) 90.00
SL41 – Carry cuts on front of slide – same as Hi-Power cut but the angle at the rear of the cut matches the grip angle (should be done with ball cuts) 100.00

THUMB SAFETIES:

TS01 – Wilson Bulletproof bar stock thumb safety installed 93.00
TS02 – EGW bar stock thumb safety installed, lever narrowed & reshaped 140.00
TS03 – Novak bar stock thumb safety installed & lever reshaped 125.00
TS04 – Colt “Commercial” standard thumb safety installed 65.00
TS10 – Wilson Bulletproof ambi thumb safety installed 190.00
TS11 – Wilson Bulletproof wide ambi thumb safety installed, lever narrowed & reshaped 250.00

gn

GRIP SAFETIES:

GR01 – Modify your GI-style grip safety for use with Commander hammer 40.00
GR02 – S&A or Les Baer beavertail grip safety installed – (S&A must be used on Springfield Armory pistols & Caspian frames) 141.00
GR03 – EGW bar stock beavertail grip safety installed 160.00
GR10 – Tune existing grip safety to unblock trigger sooner (labor only) 15.00
GR11 – Weld & re-fit existing grip safety arm to block trigger (labor only) 35.00

FRAME MODIFICATIONS:

FR01 – Ultimate forged slide stop (flat lever) installed including groove for easy installation 60.00
FR02 – Ultimate forged slide stop (curved lever) installed including groove for easy installation 60.00
FR03 – EGW bar stock slide stop installed including groove for easy installation 70.00
FR04 – Add groove to slide stop for easy installation & avoid idiot scratch 15.00
FR10 – Shorten slide stop pin & chamfer hole on right side of frame 75.00
FR11 – Add plunger detent to slide stop 10.00
FR20 – Mag catch installed, standard length 20.00
FR21 – Extended mag catch installed, .060 longer than standard 25.00

DEHORNING:

DE01 – Round/Bevel all sharp edges of entire pistol. This is a mild dehorn that maintains all of the original lines of the pistol (refinishing not included) 90.00

REFINISHING:

RE01 – Matte blue entire pistol 190.00
RE02 – Blue with matte frame & the sides of slide polished to factory grade (400 grit) 250.00
RE03 – Blue with sides of frame & slide polished to 600 grit 290.00
RE10 – Matte blasted finish entire stainless steel pistol 75.00
RE11 – Matte stainless frame & the sides of the slide polished to 320 grit 140.00
RE20 – Cerakote entire pistol (one color) 200.00
RE21 – Cerakote entire pistol (two colors) 250.00
RE30 – Tungsten Nickel Teflon, matte with sides of slide polished to 400 grit. Also available in two-tone 250.00
RE40 – Tungsten DLC, matte with sides of slide polished to 400 grit 300.00

Prices do not include refinishing. Prices are for carbon steel parts. Stainless steel parts usually cost a little more.

Leave a Reply

Your email address will not be published. Required fields are marked *